All new orders will be delivered after Christmas
A two-stage process, Kick-Start Oxygenator begins by eliminating algae and blanket weed, and then Pure Aqua breaks down the sludge and clears the water.
Before you use the two Pond Clear Pro products, do please read the instructions carefully. You'll find full instructions with your order.
While the product is entirely harmless to pond life when used correctly, do take a little extra care if you have fish. In such a case add Pure Aqua in stages over a period of 4-5 days to ensure that oxygen levels are maintained in your pond.
Below, you will find a simple guide to calculating the size of your pond.
If you have any questions, please Contact Us.
The YouGarden Team
To calculate how much Pond Clear Pro 2 Step your pond requires, follow this quick guide:
Measure the average Length (L), average Width (W) and average Depth (D) of your pond in metres.
For example; for a pond that is 7m long, 5m wide and 0.5m deep:
L x W x D = V
7m x 5m x 0.5m = 17.5m³
To then calculate the volume in litres, simply multiply by 1000.
V x 1000 = Volume in Litres
17.5 x 1000 = 17500 litres
To roughly calculate the volume of a circular pond, measure the diameter (D) of the pond in metres and halve this to find the Radius (R).
For example; for a circular pond that is 5m wide and 1m deep:
D / 2 = R
5 / 2 = 2.5m
Multiply the radius by itself, and then multiply this number by three to find the approximate surface area (A).
R x R x 3 = A
2.5m x 2.5m x 3 = 18.75m³
Multiply then by the depth of the pond (D) in metres and again multiply by 1000 to calculate the volume in litres:
A x D = V
18.75m x 1m = 18.75m³
V x 1000 = Volume in litres
18.75 x 1000 = 187500 litres
Finally, check the pack size you need. The volumes treated are:
Small Pack treats up to 10,000 Litres
Medium Pack treats up to 20,0000 Litres
Large Pack treats up to 40,000 Litres
Extra Large Pack treats up to 60,000 Litres
If you have bought too much, there’s no need to worry – simply snip open the sachet, empty out the approximate amount required and then seal the remainder in cling film, ready for future use - it will keep for up to two years.
PRIOR TO APPLICATION – If your pond has excessive blanket weed, first remove as much as possible and dispose of it on the compost heap. This will prevent the build-up of dead organic material, and therefore improve microbial digestion and reduce oxygen consumption.
Step 1, Day 1: Add Kick-Start Oxygenator, the Fast-Acting Pre-treatment
Used in conjunction with Pure Aqua to optimise performance, the Kick-Start Oxygenator helps to quickly eliminate algae, blanket weed and green water.
Sprinkle contents of the Kick Start sachet over the pond, covering as much of the surface as you can access.
One sachet will treat a pond up to 20,000 litres. For Ponds over 20,000 litres add an extra sachet for each additional 20,000 litres.
Step 2, Day 3-4: Add Pure Aqua - with 'Zeolite Ultra' to both extend and enhance performance.
Open your pack of Pure Aqua and simply drop the sachet(s) into the pond. The sachet(s) will dissolve releasing the microbes into the water and the Zeolite will drop to the bottom.
If you need to add over a number of days (for example if you have fish present in your pond, see warning below) add the sachet(s) to about 5 litres (1 gallon) of lukewarm water to help activate the microbes. Once mixed the microbes will start to feed on the added nutrients and will stay active for at least 5 days. As they begin to work the pond may well turn from green to brown, before becoming clear.
The Zeolite in Pure Aqua is added as it gives a stable and massive surface area for the microbes and bacteria to colonise once in the pond, thereby increasing effectivity.
While harmless to fish and plants, it is very important that there is sufficient oxygen, so that fish are not deprived. If there is any doubt apply a small amount of Pure Aqua each day over five days. If fish move to the surface, aerate immediately. In hot weather water does not hold as much oxygen.
Each soluble sachet is sufficient to treat a pond up to 10,000 litres
Suitable for all pond types including fishponds, wildlife ponds and natural swimming pools. May also be used in water butts and tanks to eliminate algae.
The recommended application rates of Pond Clear are:
| Pond Size (litres) | Number of Sachets |
| Up to 10,000 Litres | 1 |
| For Each Additional 10,000 Litres | 1 |
Store in a cool dry place, out of direct sunlight, beyond reach of children. Keep pack sealed to avoid water absorption.
Avoid eye contact and do not inhale or ingest. Wash hands after use.
Biodegradable and non-toxic to humans, pets, fish and wildlife.
1. When Can I Apply Blooming Fast Pond Clear Pro 2 Step?
Use Pond Clear Pro at any time of day when water temperature exceeds 10°C. For best results, apply when water temperature is 12°C or higher.
2. What is Pond Clear Pro & how does it work?
Pond Clear Pro 2 Step is a biological product which works in 2 stages. It consists of different types naturally occurring bacteria that work in tandem to improve the water quality of your pond in the following ways:
3. How do I apply Pond Clear Pro?
Pond Clear Pro could not be easier to use.
DAY 1: Add Kick Start Oxygenator by sprinkling the contents of the Kick Start sachet into the Pond. One sachet of Kick Start will treat a pond up to 20,000 litres
DAY 3-4: Add Pure Aqua by simply dropping the sachet(s) into the pond. The sachet(s) will dissolve releasing the microbes into the water and the Zeolite will drop to the bottom.
4. How do I know how much Pond Clear Pro to use?
To calculate how many sachets you need, follow the easy to use guide above.
5. How quickly does Pond Clear Pro work?
As every pond eco-system is different, results can vary. Most of the time, you will start to see your pond water change within four to five days of adding the Oxygenator, although sometimes it does take a little longer. Your pond should be noticeably clearer within two to four weeks, as long as water temperature is above 10°C. If, after this time, no noticeable change has taken place, apply a second dose.
6. How frequently should I apply Pond Clear Pro?
Often, Pond Clear will clear a pond of algae, blanketweed and green water after just one dosage however depending on conditions, it may take more. To maintain a healthy pond eco-system, it is recommended that you apply Pond Clear every couple of months, when water temperature is above 10°C.
7. Should I remove blanketweed from my pond before application?
Yes, remove as much blanketweed as possible before applying Blooming Fast Pond Clear Pro 2 Step.
8. Is Pond Clear Pro safe for fish & wildlife?
Yes! Pond Clear Pro will actually improve the health of your fish, by improving the quality of the water in which they live. It was originally developed for use in commercial fish farms, angling clubs and fishing lakes. It is not known to have any harmful effects on frogs, newts, birds or any other wildlife. However, do not overdose your pond with the Pure Aqua as it may affect the oxygen level. In hot weather water does not hold as much oxygen. If in any doubt apply a small amount each day over five days.
9. How should I store Pond Clear Pro and how long will it last?
Pond Clear Pro comes in water soluble sachets. Wrap any excess in cling film and keep in a cool, dry place. If kept dry and secure, the product can be used for 2 years.
If you have any further questions, please Contact Us.
The YouGarden Team
NEW
Flowers & Plants
Trees & Shrubs
Fruit & Veg
Outdoor Living
Christmas
Sale
Gardening Tips
Free 30 Day Refund & Replacement
Affordable Plants Straight to Your Door
Double Guarantee On Hardy Plants
10 Years Of Trusted Service Award